DELTAPLUS Double Nitrile Coating Foam Nitrile Palm

Double nitrile coating on polyamide lining. Third rough foam nitrile coating on palm and fingertips. Length: 35 cm. Thickness: 1.15 mm on cuff - 1.30 mm on palm.
Support: 100% polyamide.
Coating: Nitrile.

EN420:2003+A1:2009 General requirements  

5Dexterity (from 1 to 5)
Protective gloves against mechanical Risks (Levels obtained on the palm)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)  

4Resistance to abrasion (from 1 to 4)
1Resistance to cutting (from 1 to 5)
2Resistance to tear (from 1 to 4)
1Resistance to puncture (1 to 4)
XResistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.  

TYPEBType B - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).
.Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.
A2 > 30 mnMéthanol (A) CAS 67-56-1
J3 > 60 mnn-Heptane (J) CAS 142-85-5
K5 > 240 mnCaustic soda 40% (K) CAS 1310-73-2
L2 > 30 mnSulphuric acid 96 % (L ) CAS 7664-93-9
Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against  micro- organisms risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.  

BACTERIA + FUNGI.BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.